Finderomend Chainsaw Helmet with Face Shield and Ear Muffs Functional Forestry Safety Helmet with Hearing and Face…

Enter your model number to make sure this fits.
If you used to use a chainsaw and mower without a helmet and earplugs.The noise will make very tired after work. This helmet/shield/hearing protection combo is rugged, stable, well-designed, comfortable, easily adjusted, and blocks out loud noises. With the ear muffs on your ears you can shake your head side to side or up and down vigorously and it remains firmly in place. Even without the ear muffs on your ears, the helmet stays in place if your dial in the hat band correctly.
The chainsaw helmet suspension has 6 points of support and a dial to adjust the fit. The dial adjustment is very handy especially if you sometimes wear a hat under the helmet.

Amazon.com.au Price: $64.95 (as of 25/09/2022 05:16 PST- Details)

Added to wishlistRemoved from wishlist 0
Add to compare
Category:

【Installation Steps】

:1) Take the helmet and the cross-strap with the U shaped attahcments. Withe the helmet up-side down, take one of the U shaped attachments and make sure the feet are facing outward, then slide the attachment down into the two slots until it clicks in.
2) Install the headband. Keep the helmet up-side down on your table. Take the adjusting knob and rotate it away from headband webbing. The important thing to note when assembling it is that the four translucent white attachment points on the headband that hold the webbing need to be folded in half before you can insert them in the helmet slots. The folded edge is inserted into the helmet slots first, then pushed down until you hear it click.
3) Install the hearing protectors. Lay the helmet on you table right-side up (vents on top). Take the ear muffs and rotate the black insertion tab around so that it points away from the ear muff. This just makes it easier to install. Insert the ear muff tabs into the two slots on either side of the helmet keeping the soft padded inside of the ear muff facing (touching) the helmet. Depress the locking tabs on either side of the insert tab and push the ear muff down until you click the unit in place.
4) Install the visor bracket. Keep the helmet right-side up on the table. Flip the visor bracket attachment tabs over so that they point away from the visor bracket and slide the two tabs into slots in the ear muff brackets. As you push the visor bracket back into the slots the locking tab will need to be depressed twice so you can properly seat it. Use the little square openings (windows) and depress the visor tab to allow it to move back 2 clicks.
5) Attach the screen. The visor bracket has 5 locking screen attachments. You will first need to twist them so each is horizontal, then beginning in the center lay the screen over visor bracket and twist the center locking attachment so that it is vertical.

Enter your model number to make sure this fits.
If you used to use a chainsaw and mower without a helmet and earplugs.The noise will make very tired after work. This helmet/shield/hearing protection combo is rugged, stable, well-designed, comfortable, easily adjusted, and blocks out loud noises. With the ear muffs on your ears you can shake your head side to side or up and down vigorously and it remains firmly in place. Even without the ear muffs on your ears, the helmet stays in place if your dial in the hat band correctly.
The chainsaw helmet suspension has 6 points of support and a dial to adjust the fit. The dial adjustment is very handy especially if you sometimes wear a hat under the helmet.
The forestry helmet has a wire mesh face screen with 3 positions: fully raised, fully lowered, and partially lowered. The partially lowered position is there to allow you to move the bottom of the screen up and away from your chest when you are looking down while sawing. The screen on this helmet is large and the mesh is finer. The mesh shield is made of metal wire mesh, with high strength, and the surface is sprayed with plastic treatment, which prevents splashes and has good air permeability.
The ear muffs are suspended on 2 wires and give a tight fit that helps to hold the helmet in place.
The hard hat is made of ABS material, which has good brightness and toughness.It is comfortable to wear and can be changed to your favorite size through the back of the head adjuster..The soft pad on the forehead is covered with sponge, which can protect the eyebrow edge, absorb sweat, and wear it comfortably.

Specification: Finderomend Chainsaw Helmet with Face Shield and Ear Muffs Functional Forestry Safety Helmet with Hearing and Face…

Batteries Included

Brand

Manufacturer

Item Model Number

Package Dimensions

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Finderomend Chainsaw Helmet with Face Shield and Ear Muffs Functional Forestry Safety Helmet with Hearing and Face…”

Your email address will not be published.

Finderomend Chainsaw Helmet with Face Shield and Ear Muffs Functional Forestry Safety Helmet with Hearing and Face…
Finderomend Chainsaw Helmet with Face Shield and Ear Muffs Functional Forestry Safety Helmet with Hearing and Face…

Amazon.com.au Price: $64.95 (as of 25/09/2022 05:16 PST- Details)

anthonylakiss.com
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart